Jaw Crusher and Gyratory Crusher Within the crushing circuit, a primary crusher reduces material down to a size that can be conveyed and fed to the secondary crushing circuit. The two most common primary crushers used for coarse run-of-mine material are the jaw and gyratory crushers.
Compare Gyratory Crusher vs Jaw Crusher. Jaw and gyratory crushers are heavy equipment and are not used extensively in the food industry. In a jaw crusher, the material is fed in between two heavy jaws, one fixed and the other reciprocating, so as to work the material down into a narrower and narrower space, crushing it as it goes.
gyratory crusher vs cone crusher parts gyratory crusher vs cone crusher XSM is a leading global manufacturer of crushing and milling equipment,XSM also supply individual (gyratory crusher vs cone crusher...) crushers and mills as well as spare parts of them.
With higher reduction ratio than the jaw crushers and with dependable crushing performance, the primary impact crusher is capable to crush even the hardest materials. This crusher is composed of a rigid and durable rotor, over-sized bearings, a hydraulic mono-block feed plate, a large feed opening, and hydraulic cylinders that provide continual ...
Jaw and gyratory crushers are heavy equipment and are not used extensively in the food industry. In a jaw crusher, the material is fed in between two heavy jaws, one fixed and the other reciprocating, so as to work the material down into a narrower and narrower space, crushing it as it goes.
The jaw crusher is normally used as primary crusher. It is mostly suitable for hard materials and the wear cost are lower than the impact or cone crusher. As for cone crusher it is recommended for hard materials as a secondary crusher where you can get fractions from 0–32mm.
the comparison between gyratory crusher and jaw crusher 1.The crushing of gyratory crusher is continuously, so gyratory crusher features high productivity, high reduction ratio, running stable, low consumption, more excellent finished product shape, etc.
Jaw crusher VS gyratory crusher in mining plant In choosing which to install for the specific purpose TAGGART suggested a law according to which "if the hourly tonnage to be crushed divided by the square of the gape expressed in inches a quotient less than 0.115, use a jaw crusher, otherwise a gyratory crusher.